How-To Guides · DIY & home

How to Fix a Jammed Garbage Disposal (Safely, No Plumber)

Flip the switch, and your garbage disposal just hums, or does nothing at all? It's usually jammed, and you can free it yourself in a few minutes, safely.

1. Step 1: Power Off

Step 1: Power Off

First, turn the disposal's switch off. For extra safety, switch off its breaker too. Never put your hand down into the disposal, even with the power off.

2. Step 2: Look, Then Use Tongs

Step 2: Look, Then Use Tongs

Shine a flashlight down the drain. If you see something stuck, like a bottle cap or a utensil, pull it out with tongs or pliers.

3. Step 3: Hex Wrench Underneath

Step 3: Hex Wrench Underneath

Look under the sink, at the very bottom of the disposal. There's a small six sided hole in the center. Push the hex wrench that came with it into that hole, and work it back and forth, until it turns all the way around freely. That frees the jam.

4. Step 4: Wait, Then Press Reset

Step 4: Wait, Then Press Reset

Let the motor cool for a few minutes. Then press the small red reset button, also on the bottom. Press it with your finger, not a tool.

5. Step 5: Test It

Step 5: Test It

Turn the breaker back on, run cold water, and flip the switch. It should spin up normally.

6. Still Humming?

Still Humming?

If it still just hums and won't turn after all that, the motor may be the problem. That's a good time to call a plumber, or replace the unit.

Tools that make this easier

Simple Google Sheets + Excel tools from WiscHaven. Buy once, no subscription.

Sources

Checked against the official sources above. Steps can change as apps update - tell us if something looks different: wischavenindustries@gmail.com